jack chen's Other Videos

Dancing Spider Robot
Posted by jack chen
Posted April 16, 2015 | 0 favorites
click to rate
This Spider robot is made of 18 pcs servo motors and can "dance " it can also finish push-up and many other actions under the control of the Servo Motor Controller Robot Contorller. To make this robot move, we just need the control software and the following components: 1.6 Legs 18 DOF Robot Black Spider Robot 18pcs SG90 Servo Motor http://www.icstation.com/a1506-legs-robot-black-spider-robot-18pcs-sg90-servo-motor-p-5378.html 2.32 Channels Servo Motor Controller Robot Contorller Servo Driver http://www.icstation.com/channels-servo-motor-controller-robot-contorller-servo-driver-p-3509.html 3.7.4V power supply You can download the control softward here: www.icstation.com/product_document/Download/3509.zip Notes: 1.The controller 3509 can connect with 32 pcs servo motors, connect the pin "+" with the red wire of the servo motor, the pin "-" with the orange wire of the servo motor, connect the pin "S" with the yellow wire of the servo motor. 2.You can also other controller like Arduino, but we have not prepared the related material right now. And you can use the joystick when you use the control 3509, but you need to order it yourselves. 3.You can control the robot via USB wire with the help of the controller 3509 and it's control software. But if you use other controller, you have to try another way to control the robot, we do not have related material for other controller riht now. For more details: http://www.instructables.com/id/Hexapod4-Spider-RobotInstruction-Manual/
URL  |  HTML code
Recipient's email(*):

Separate multiple email addresses (up to 5) with commas.